Product Quantity: V1000-V0040G3
Guarantee: 18 months
Kind: General Function Inverter
Certification: CE/ISO9001
Dimension: 180*ninety six*151
Tailored: Of course
Management Mode: V/F Control, V/F Control
Rated Power: 4KW
Nominal Voltage: 380V
power period variety: 3 Phase
Certification: CE/ISO9001
Shade: Black
MPPT: Higher Efficiency
Security: Overload
Output voltage: -380V
Start off Torque: .5Hz/a hundred and fifty%
Material: Plastic
OEM: Support
Packaging Details: We have cartons and wood bins,which are packed in cartons under 75KW and picket containers earlier mentioned 93KW. Thickened shockproof foam is crammed inside to avoid hurt to products in trasut.
Port: HangZhou HangZhou HangZhou ZheJiang
4KW 380V 3 Period 380V Output Frequency -500Hz Electric Travel AC VFD Ac Motor Travel Inverter for pump, irrigation, Pool
| One-stage electricity supply: 220V, fifty/60Hz | ||||
| Product ID | Adaptation motor | Rated Electrical power | Rated Output Present(A) | Product Proportions L*W*H(mm) |
| V1000-V0007G1 | .75KW 1HP | .75KW 220V | four | a hundred and seventy*86*131.five |
| V1000-V0015G1 | 1.5KW 2HP | 1.5KW 220V | 7 | one hundred seventy*86*131.5 |
| V1000-V0571G1 | two.2KW 3HP | two.2KW 220V | 10 | 180*96*151 |
| A few-stage energy supply: 380V, fifty/60Hz | ||||
| V1000-V0007G3 | .75KW 1HP | .75KW 380V | two.five | a hundred and seventy*86*131.5 |
| V1000-V0015G3 | one.5KW 2HP | one.5KW 380V | three.7 | one hundred seventy*86*131.5 |
| V1000-V0571G3 | two.2KW 3HP | 2.2KW 380V | 5.1 | a hundred and seventy*86*131.5 |
| V1000-V0040G3 | 4KW 5HP | 4KW 380V | 8.5 | a hundred and eighty*96*151 |
| V1000-V0055G3 | 5.5KW 2HP | 5.5KW 380V | 13 | 221.6*113*166.5 |
| V1000-V0075G3 | seven.5KW 10HP | seven.5KW 380V | 16 | 221.6*113*166.five |
| V1000-V0110G3 | 11KW 15HP | 11KW 380V | 25 | 265*a hundred and sixty*171.5 |
| V1000-V0150G3 | 15KW 20HP | 15KW 380V | 32 | 265*one hundred sixty*171.five |
| V1000-V0185G3 | eighteen.5KW 25HP | eighteen.5KW 380V | 38 | 302.5*192*171.five |
| Energy assortment | three phase AC 380V (-15%~+30%) |
| Optimum Frequency | Vector Handle:~500Hz V/F Control:~500Hz |
| Carrier Frequency | .5kHz~16kHz the provider frequency will be instantly altered in accordance to the load attributes |
| Input Frequency Resolution | Electronic Location: .01Hz Analog Setting: maximum frequency ×0.571% |
| Handle Mode | Open Loop Vector Management(SVC)V/F Management |
| Startup Torque | G Type: .5Hz/150%(SVC) 0Hz/a hundred and eighty%(FVC)P Type: .5Hz/one hundred% |
| Overload Capacity | G Kind:one hundred fifty% rated present sixty seconds 180% rated present 3 secondsP Type:120% rated present 60 seconds Factory Customize cnc machining parts turning Mini Worm Gear 150% rated current 3 seconds |
| Torque Enhance | Auto Torque Boost FunctionManual torque enhance .1%~30% |
| V/F Curve | Linear V/F,multi-level V/F and sq. V/F curve (electrical power of 1.2,1.4,1.6,1.8,2) |
| DC Brake | DC Brake Frequency: .00Hz to greatest frequency. Brake time: .0s to 36.0s Brake existing value:.% to one hundred.%. |
| Jog Manage | Jog Frequency Assortment:.00Hz~50Hz Jog Acceleration/deceleration Time .0s~6500.0s |
| Simple PLC and Multi-velocity Operating | It can understand at maximum of 16 segments speed working by means of the developed-in PLC or management terminal |
| Created-in PID | It is easy to understand approach-managed shut loop manage system |
| Car Voltage Regulation(AVR) | It can keep consistent output voltage instantly in the case of modify of network voltage |
| Rapid Present Restrict | Minimize the in excess of-current fault, protect standard operation of the inverter |
| Rapid Recent Limit | To stay away from Inverter frequency above-recent fault |
| Timing Control | Timing manage function: established time variety 0Min~6500.0Min |
| Command Resource | Procedure panei reference, handle terminal reference, and serial COM port reference. It can be switched in different techniques. |
| Enter Terminal | Regular: 5 Electronic enter terminals 2 Analog input terminals 1 Assist -10V voltage input or ~20mA current enter. |
| Output Terminal | Common: 2 Digital output terminals 1 Relay output terminal, which can be expanded into 2 channels one Analog output terminals, support ~10V output voltage |
| Altitude | Under 1000m |
| Ambient Temperature | -10 ℃ to +40 ℃ (Derating use when underneath ambient temperature of forty ℃ to 50 ℃) |
| Humidity | Considerably less than ninety five%RH, Higher high quality RC Components Metal Push Equipment R86008 for a hundred and ten RGT EX86100 Remote Handle Crawler Autos First Components without having condensing |
| Vibration | Considerably less than 5.9m/s (.6g) |
Information Photos
Software
Packing & ShippingWe have cartons and wood packing containers, which are pwcked in cartons underneath 75KW and wood packing containers previously mentioned 93KW. Thichened shockproof foam is loaded inside to avoid harm to equipment in transit.
FAQQ 1: Are you trading firm or manufacturer ?A: We are factory.Q 2: How lengthy is your lead time?A: Typically it is 3-7 days if the merchandise are in inventory. or it is 10-20 days if the merchandise are not in stock, it is according to amount.Q 3: Do you give samples ? is it cost-free or additional ?A: Of course, we could supply the sample,but we will charge the sample charge and the value of freight.Q 4: What is your terms of payment ?A:We settle for T/T, L/C and Western Union,MoneyGram .Q 5: What is the common of package deal? A. Export normal package deal or specific bundle according to consumer prerequisite.Q 6. Is there any low cost ?A. The price reduction will depend on the quantity you obtain.Q 7. What is your provide capacity?A. The week output of the manufacturing unit exceeds 500 PCs.Q 8.Do you offer guarantee for the products?A. Sure, we offer 18 months of guarantee for all the products from us.Q 9.Could M-driver provide technical support?A.We' have more than 12 many years knowledge in this field. If you will find any problem, remember to feel free of charge to make contact with us, we' 8mm Colorful Turquoise Pair Bracelet Steel Adore Loom Silver Pair Bracelet Anega Magnetic Bracelet ll give recommendation from our engineer to support you solve the dilemma.
Worm gear reducer
A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer's shear thinning properties. By measuring "worm activity", the researchers could calculate the viscosity of the mixture. The researchers then altered the worms' activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It's also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by czh 2023-07-03
